Exterior Wall Thickness

To avoid expensive mistakes or problems during construction, a detailed construction plan of the walls should be prepared. The result of the division will equal the number of layers (courses) of block needed to reach that height. If the planned height of the walls is 290cm. I was wondering if anyone had an idea how thick an exterior brick wall would be (i.e. Just shows how many different ways the brick can be used. If you are drilling, try to drill into a mortar joint if you can find it. It may have been both the inner and outer wythes were brick, or sometimes the inner wythe was concrete block with the more decorative brick on the outside.

Since the overall wall thickness we are going for is around 12 inches, you can see that the shelves cannot be more than 6-7 inches deep.

You can create the impression of a thicker exterior wall by adding closets or cabinets around a window, perhaps adding a seat below the window.

That makes about a 5-inch thickness for its basic construction. These may add another 1 to 3 inches to the wall’s thickness. For example, an easy way to create a better sound barrier is to put two layers of drywall on one side of a wall.

So you see, concrete masonry units can do many jobs. They are available in a multitude of colors and textures including split-face, ground face, polished face and glazed face. Additionally, concrete masonry walls pass the hose stream test unlike other fire rated wall systems. Several different finishes can be formed on the exterior surface of the brick such as wire cut or sand finished, depending on the method used to form the brick into the desired shape.

A non-load bearing wall is only a partition that divides the various rooms of a building. Chasing is cutting a long groove in the wall in which you can install your services. This is why they do not perform well in earthquakes, when entire buildings are shaken horizontally.

Thickness of Walls

If they are cast horizontally and tilted into place, they will be 6 to 8 inches thick.

How to Decide Thickness of Masonry Walls in Buildings – Exterior Masonry Wall Thickness


Exterior walls usually have an exterior finish material such as brick (add about 3 1/2″) or maybe stucco (add about an inch) or some type siding (wood, aluminum or vinyl will add about an inch) to the framing numbers previously mentioned.

Al.l these answers are for one or two story buildings. When you add the outside sheathing to the 2×6, you get just under 6 total inches as the sheathing is generally just a little bit under 1/2-inch thick.

Wall thickness actually impacts the look and feel of the house. The end result of this type of construction is a 10- to 12-inch thick wall. Today, residential construction methods involve framing a house with wood or metal studs, which range from 3½ to 5½ inches wide, resulting in a much thinner wall.

In addition, setting windows to the outside of a thicker wall results in a wider than normal windowsill. While there are some lesser-used construction methods (such as rammed earth or straw bale construction) that inherently produce thicker walls, one other approach possibly applicable in a remodeling situation is adding rigid insulation boards to the exterior of your house.

Exterior Wall Thickness

www.youtube.com/watch?v=L742AgKiucM

This video will show how to add the proper thickness or second line to represent exterior walls on the practice house.